Uncategorized

Hello world!

Posted on February 16, 2008. Filed under: Uncategorized |

Welcome to WordPress.com. This is your first post. Edit or delete it and start blogging!

Read Full Post | Make a Comment ( 1 so far )

Try android sdk

Posted on January 29, 2008. Filed under: Uncategorized |

I have download Android SDK almost a month (but never use it ^_^). Currently I have use it and I have not forget to capture screen shot samples for you Main screen, It have 4 icons: application, contact, browser, map, dev tools.
I have capture some for browser and Map.
ฺBrowserAndroid used webkit engine (Nokia use [...]

Read Full Post | Make a Comment ( None so far )

Asterisk: let’s upgrade sangoma firmware

Posted on January 16, 2008. Filed under: Uncategorized |

I have 3 sangoma cards, and I would like to upgrade firmware. You can use command “wanrouter hwprobe” to check sangoma hareware info.
[root@asterisk1 ~]# wanrouter hwprobe——————————-| Wanpipe Hardware Probe Info |——————————-1 . AFT-A104-SH : SLOT=0 : BUS=4 : IRQ=10 : CPU=A : PORT=1 : HWEC=128 : V=292 . AFT-A104-SH : SLOT=0 : BUS=4 : [...]

Read Full Post | Make a Comment ( None so far )

Asterisk: let’s upgrade sangoma firmware

Posted on January 16, 2008. Filed under: Uncategorized |

I have 3 sangoma cards, and I would like to upgrade firmware. You can use command “wanrouter hwprobe” to check sangoma hareware info.
[root@asterisk1 ~]# wanrouter hwprobe——————————-| Wanpipe Hardware Probe Info |——————————-1 . AFT-A104-SH : SLOT=0 : BUS=4 : IRQ=10 : CPU=A : PORT=1 : HWEC=128 : V=292 . AFT-A104-SH : SLOT=0 : BUS=4 : [...]

Read Full Post | Make a Comment ( None so far )

Asterisk: let’s upgrade sangoma firmware

Posted on January 16, 2008. Filed under: Uncategorized |

I have 3 sangoma cards, and I would like to upgrade firmware. You can use command “wanrouter hwprobe” to check sangoma hareware info.
[root@asterisk1 ~]# wanrouter hwprobe——————————-| Wanpipe Hardware Probe Info |——————————-1 . AFT-A104-SH : SLOT=0 : BUS=4 : IRQ=10 : CPU=A : PORT=1 : HWEC=128 : V=292 . AFT-A104-SH : SLOT=0 : BUS=4 : [...]

Read Full Post | Make a Comment ( None so far )

Change Intel Internal Modem to X100P

Posted on August 14, 2007. Filed under: Uncategorized |

I found from this link.
just modify source code zaptel/wcfxo.cchange fromstatic struct pci_device_id wcfxo_pci_tbl[] __devinitdata = { { 0xe159, 0×0001, 0×8085, PCI_ANY_ID, 0, 0, (unsigned long) &wcx101p }, { 0×1057, 0×5608, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &wcx100$ };
to static struct pci_device_id wcfxo_pci_tbl[] __devinitdata = { { 0xe159, 0×0001, 0×8085, PCI_ANY_ID, 0, 0, [...]

Read Full Post | Make a Comment ( None so far )

E1/T1 cross cable

Posted on August 11, 2007. Filed under: Uncategorized |

Read Full Post | Make a Comment ( None so far )

Dialogic card

Posted on August 11, 2007. Filed under: Uncategorized |

Just take a photo with another one card – Dialogic card!This card use ISA interface, very old one

Intel Dialogic D/160SC-LS Analog Trunk Board

16 Ports Per Card
State-of-the-art DSP (Digital Signal Processor) Technology
Resource Sharing
Reliable DTMF Detection and DTMF Cut-Through
Use Multiple Boards in a Single PC

very large card for PC!

Read Full Post | Make a Comment ( None so far )

Sangoma A102’s photo

Posted on August 11, 2007. Filed under: Uncategorized |

Sangoma A102 have 2 E1/T1/J1 slot

Read Full Post | Make a Comment ( None so far )

Sangoma A102’s photo

Posted on August 11, 2007. Filed under: Uncategorized |

Sangoma A102 have 2 E1/T1/J1 slot

Read Full Post | Make a Comment ( None so far )

« Previous Entries

Liked it here?
Why not try sites on the blogroll...